Ceramic Coat

Ceramic Coat gives a very hard and abrasion resistant surface due to its extreme scratch resistant property. This hard surface protects the applied area from erosion and corrosion. The raw materials used in this formulation are of pharmaceutical grade, ideal for food industry.

Application procedure:
– Clean surface thoroughly by sand blasting to SA 2 1/2 Swedish standard or power brush to bare metal.
– Clean surface with thinner to ensure the target surface is free from dirt and oil.
– Mix the base thoroughly. Once done, add the hardener and continue mixing for the next 5 minutes.
– Mixing ratio: 940g Base + 60g Hardener.
– Apply the CERAMIC COAT with brush or roller.
– Torch dries in 4 hours & fully cured after 24 hours.
– Coated surface is advised to be heated to 80 °C to increase wear resistance and protection

Note:
Do not add thinner

Areas of application:
Deaerators, heat exchangers, water boxes.